|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
The SX50 is still a good, widely supported system. The main drawback to the SX50 is it's lack of ability to interface with a PMS system. Other than that, voice mail systems are still available, though not from Mitel. (Mitel never did deploy a VM system for the SX50.) Call costing equipment is available. All parts are still available for the SX50, although consoles and RMATS modules are getting scarce. You MUST have a console for full room status flexibility. The RMATS (Remote Maintenance And Testing System) function never was very popular, and is not really a concern. I would say the SX50 has another 10 years of 'afterlife'. The ML/EL is a good system, however it is End Of Life, and the basic program Flash card is a concern. If I had to pick a used system, I think it would be either the SX50 or the ICP. The old SX200D series that runs on floppy discs is NOT a good choice, as it is no longer supported by Mitel AT ALL.
FYI, to start a new thread/topic, click on "Post New Topic" at the top of the page.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,299
Posts638,872
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
68
guests, and
295
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|