Dialtone on T-1|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Re: Dialtone on T-1 #119064 04/02/01 03:32 PM
Joined: Apr 2001 Posts: 3 Woburn, MA, USA TSPlusOne OP Member
OP TSPlusOne Member Joined: Apr 2001 Posts: 3 Woburn, MA, USA	I have the 24-channels of the T1 setup in Line Pool A, and the phones programmed for Pool A as their Prime Line. When they go off-hook, they get an available line from the T1, but no dialtone -- just dead air. The calls do still go through. AT&T (their carrier) says they can change from Wink-Start to Tone-Start, but the MICS does not have that option. I was wondering if maybe it was something with AT&T's switch, or maybe I missed something in the admin programming. (FYI: The T1 & MICS are set for B8ZS & ESF.) What else am I missing???

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Entire Thread
Subject	Posted By	Posted
Dialtone on T-1	TSPlusOne	04/02/01 09:22 AM
Re: Dialtone on T-1	DrPbx	04/02/01 04:44 PM
Re: Dialtone on T-1	TSPlusOne	04/02/01 07:32 PM
Re: Dialtone on T-1	openwire	04/02/01 08:34 PM
Re: Dialtone on T-1	cyberphoneguy	04/02/01 08:40 PM
Re: Dialtone on T-1	rustynails	04/11/01 05:08 PM

Moderated by MooreTel

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Dialtone on T-1