Originally posted by NTlayoff:
Are you dialing 411 or 9411 ?
Is '9' the only destination code in the system?
Dialing "9" to get out, then "4-1-1". If I do the same with "9-9-1-1", it works (Dial "9", then "9-1-1"). If I dial "9", then "1-1", call goes nowhere (I thought, perhaps, the system was absorbing the "4"). Must dial 9-9-1-1 to get through to "911" operator.
If I remember correctly (I've been doing this remotely), Destination code is "9." (9/any). There may be other destination codes. I don't have the system in front of me. Have been programming this one remotely via an employee on-site.
