|
|
|
|
Joined: Sep 2003
Posts: 39
Member
|
|
Member
Joined: Sep 2003
Posts: 39 |
I am trying to program a flash into a speed dial number on a CTX 100. I need to do this so that I can put a one touch button on the main reception set in order for her to answer a call then flash the set and have it call a speed dial ie. 600.
I can program the one touch speed dial but cannot seem to get the flash code to go into the speed dial number. I have programmed a flash key on the set and then have tried the following for speed dial. #66 600 flash key then the number, the # to save. It will not allow me to put this flash key into the speed dial number.
Anybody got any ideas as to what I am doing wrong.
thanks in advance
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
How about programming a one-touch button to perform that for you instead of putting that sequence in a speed dial bin 600? Just program a button as a one-touch button and use Winadmin to program a flash, pause, and the phone number. Or go into user programming (#9876) press the button, press flash, *2, phone number, then press the button again to store it.
|
|
|
|
|
Joined: Sep 2003
Posts: 39
Member
|
|
Member
Joined: Sep 2003
Posts: 39 |
I tried to use winadmin to put a one touch button on but I don't remember if it wouldn't allow me to put the F in the one touch sequence or if it was the speed dial it would not allow the F to be typed in for flash but i will certainly try the other suggestion you gave me.
thank you for the quick response.
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
If you use Winadmin, assign the key as a one-touch, then double click on it and Winadmin will pop up another screen that will allow you to program a flash into the button.
|
|
|
|
Forums84
Topics94,528
Posts640,023
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (justbill, nonameyet),
132
guests, and
37
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
