*Ok I adjusted every switch to the exact CMA8 settings you provided.
*Next I made our Main Site (Site 1) similar to the other Sites for the CMD016 settings. I changed 0021, 0030, 0031, 0032, and 0058 all from a 0 to a 1.
*I also changed on Site 5 CMA703>1 &2 from a 3 to a 1. As soon as I made the change and dialed Sites 1, 6, and 8, I get restricted in the display and I have to grab an outside line and place a local call to talk to those sites. Went in through cat mode and reset both back to a 3, had to do a hard reset though to accept the changes and reconnect.
*Still have the same issues as mentioned in the first post… but I think the first two changes you suggested were good moves.
Any other suggestions, thanks for these suggestions so far!
