|
|
Joined: May 2005
Posts: 2
Member
|
OP
Member
Joined: May 2005
Posts: 2 |
Hello,
I have a couple of questions about the new VMP U-40 card. I am using this in an IPK system.
1) Can the network port on the front of the unit be used to configure the system? If so, what is the IP address by default? 2) Using the VM/Remote Cosession software that came with card and 57600 Baud, I can not connect to the system. I can use the same machine on an older FMS system at 19200 baud and everything works fine. Any idea. Help would be greatly appreciated! Scott
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,289
Posts638,795
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
2 members (Toner, justbill),
177
guests, and
407
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|