|
|
|
|
Joined: Dec 2004
Posts: 21
Member
|
OP
Member
Joined: Dec 2004
Posts: 21 |
I am running trixbox 2.8.0.4 and have installed a Digium AEX400 with 2 Quad FXO modules. The card is installed and working fine (using the dahdi wctdm24xxp driver per the installation manual). I also run 10 Polycom Soundpoint 601s. The only issue is that when I get a busy signal on some of the outbound calls. All inbound work fine. While listening to outbound calls with a butt set (we are in a 10 digit dialing area) the card seems to dial the first 9 digits then pause before dialing the last digit. This pause is sometimes long enough to cause the call to fail. Is this normal on Digium cards?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,287
Posts638,792
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
126
guests, and
274
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
