How to program an old Premier?

Print Thread

Rate Thread

How to program an old Premier? #545194 02/05/13 04:53 PM
Joined: May 2008 Posts: 523 Everett, WA Kaiser Member
Kaiser Member Joined: May 2008 Posts: 523 Everett, WA	Howdy, Any one know the gist on how to program an old Premier system? I've got a customer with a blown CPU and I'm replacing the CPU tomorrow with one I'm having shipped in. I haven't touched one for 12+ years. Is it with a straight through serial using Hyperterminal? Can't seem to find a manual either... Thanks!

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: How to program an old Premier? Kaiser #545219 02/06/13 01:48 AM
Joined: Jan 2013 Posts: 4 Kansas City handymanwilldo Member
handymanwilldo Member Joined: Jan 2013 Posts: 4 Kansas City	The Premier ESP 1224/2460 installation manual says "the terminal and output devices must be RS232C compatible with a male 25 pin subminiture D connector". As I recall we used Hyper terminal to program these and a regular cable bought from radio shack, but the manual does have a pinout that only uses the first 8 pins and possibly pin 20.

Moderated by Stix1

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Inter-Tel Telephones & Systems How to program an old Premier?