sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems OS 7000 VxWorks

Hi

In 7200and 7400 the system VxWorks What is the user id password

thank you

The cli is used for debug traces, which the Korean engineers can decode. There is no programming or user/tech level diagnostic information you can gain from it

OK.
for example ; How do you trace of SIP calls?
With using Wireshark program ?

Yes you have to use Wireshark.

how about logging pages/station to station calls?

SMDR can be used to log calls but not pages.

Can anything be done? We have a problem with a group of individuals that are less than professional abusing the paging system and we need to be able to trace the culprits

You could try blocking page in COS and then use authorization codes to change to a class where paging is allowed. Auth code entries are reported in Smdr So you would be able to go in and check who put in a code at the time of the page.

Hook up the paging to a CO port and track it?

My apologies, I am not aware of how to do that. As far as I can tell the paging is an internal feature that just has a audio output terminal (not an actual dialed phone number). When I use the serial logging on the com port, no "phone call" is registered. If I use the admin software and refresh the screen while the page is being made the phone making the page shows "busy" doesn't show a connected number, so unless I happen to be sitting at the screen refreshing and also happen to be paged down far enough to see whomever is doing it (all very unlikely) I don't see how to capture it.