I'd put a pedestal on top of each end of the conduit, pull your cable in and put some terminal blocks inside the pedestals to make the transition. Give Schultz Communications a call, they have everything you'll need and the expertise to get you the proper hardware:
SCHULTZ-CAD6 PEDESTAL LINK VARIOUS TERMINAL BLOCKS Here's a picture of an example of using a pedestal closure along with RPT blocks to make a transition that we did recently.
Actually, this was a small-count cross-connect facility (25 pair in, 50 pair out), but it shows the flexibility of using pedestal-type terminals at poles and buildings:
[img:left]
![[Linked Image from i98.photobucket.com]](https://i98.photobucket.com/albums/l268/ev607797/Blackthorn.jpg)
[/img]
Here are illustrations of some of Emerson/Reliable's garden terminal pedestals with various blocks installed. I wish we still had these in stock because I'd be happy to provide you with everything you need, but my boss made us throw all of that stuff away:
[img:left]
![[Linked Image from i98.photobucket.com]](https://i98.photobucket.com/albums/l268/ev607797/12X25Gardenterminal.jpg)
[/img]