So I can get this straight in my head:
E-System T1 card >>>> to other E-Sys T1 card ICM call and transfer of CO calls work.
E-System T1 card >>>> to Zultys-System (PRI) card ICM calls works both ways but unable to transfer CO call from E-Sys and you are not seeing digits in Ctrl-C (J) screen (Which I'm not sure if you will
see outgoing digits but yes you should see incoming)
E-System to E-System are T1 >>> ~ <<< to T1 (cards in E-Systems) ICM works and Transfer of CO calls work. Also what type of lines are the CO calls coming in on.
E-System to Zultys are T1>>> ~ <<< to PRI (In Zyltys) (T1 Card in E-Systems) ICM works and Transfer of CO calls fail. (Does transfer of CO calls from the Zyltys to E-System work?) (Just not from E-System to Z)
Also what type of lines are the CO calls coming in on.
Last edited by mc601; 11/21/17 07:44 PM.
