|
|
Joined: May 2007
Posts: 6
Member
|
OP
Member
Joined: May 2007
Posts: 6 |
I have an Axxess with PRI NI2 Cannot setup to call out . I am able to access trunk directly and make any type of call but am unfamiliar with programming needed to use outcall button and complete a call . When reaching the 7th digit dialing out display flashes and returns to idle condition and when placing LD or 1800etc. as the 11th digit is entered same condition . We need no restrictions of any type only need to press outgoing button . I know there are certain steps to program this but am unfamiliar with them as we have a lot of Axxess that we take care of but none with PRI .
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,291
Posts638,810
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
2 members (Toner, justbill),
132
guests, and
423
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|