|
|
Joined: Feb 2004
Posts: 2
Member
|
OP
Member
Joined: Feb 2004
Posts: 2 |
I have a Merlin Plus 820D that is giving me fits. I just adminstered another unit last month, so I think I am doing it right. I purchased the unit with all four cards (8 lines and 20 stations). I removed one of each card as they were not needed for this application. The system appears to be working in that the two lines, 8 stations, and aux port are working. There is no warning light. I have not tried paging or MOH. I am using a BIS-22D for administering. When I am plugged into station 10 with the switch on the phone set to 'P' and press the 'Admin Button' or #49, I get no response and the screen displays the word 'BLANK' as thought the button is not programmed. I have tried both station boards to no avail. I have also tried other style phones to no avail. I have tried removing and re-seating the module at the top of the unit to no avail.
Although the unit appears to be working in the default state, I would like to be able to administer the lines and extensions without walking to each one or sitting by the control unit and plugging into each one.
Any ideas?
|
|
|
Forums84
Topics94,285
Posts638,783
Members49,766
|
Most Online5,661 May 23rd, 2018
|
|
2 members (nfcphoneman, Toner),
125
guests, and
170
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|