|
|
|
|
Joined: Mar 2007
Posts: 10
Member
|
|
Member
Joined: Mar 2007
Posts: 10 |
Hello everybody
I'm involved in the process of removing a PRI trunk from a trunk group in our Avaya G3siV6. We are going from 3 PRI to 2 PRI.
Is this attainable by removing the soon to be removed PRI ports from the group member assignments in the trunk group configuration? and by adjusting the busy threshold in the same trunk group?
Any assistance would be greatly appreciated.
Thanks
|
|
|
|
|
Joined: Sep 2005
Posts: 898
RIP Moderator-General
|
|
RIP Moderator-General
Joined: Sep 2005
Posts: 898 |
Yes...you will need to remove the ports from the trunk group, also you should remove the ds1 assignment for that trunk and you should do "remove sig x" for which ever sig group you have assigned to that pri and remove that also...and you should be good to go.
Make sure you check your "sync" first to be sure your sync is not set for primary on the one that your removing..if so change it prior to removing......
...bob...
Bob Wells
WellComm, Inc.
"As long as nobody's dead or in jail, it can't be all that bad ! "
|
|
|
|
|
Joined: Mar 2007
Posts: 10
Member
|
|
Member
Joined: Mar 2007
Posts: 10 |
Thank you very much Wellco.
|
|
|
|
|
Joined: Sep 2005
Posts: 898
RIP Moderator-General
|
|
RIP Moderator-General
Joined: Sep 2005
Posts: 898 |
No problem...if you get stuck let me know.. 
Bob Wells
WellComm, Inc.
"As long as nobody's dead or in jail, it can't be all that bad ! "
|
|
|
|
Forums84
Topics94,549
Posts640,094
Members49,860
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (EV607797),
191
guests, and
31
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
