|
|
|
|
Joined: Feb 2004
Posts: 3
Member
|
|
Member
Joined: Feb 2004
Posts: 3 |
this is the first time work in mitel systems
i have mitel sx50 system with softwear version (generic 35ex3-03-06)
the consol is sx-50 phone system
i dont know which the switch i press befor i dial the password
if i dont know the password what can i do
thank you for help
ebrahim gomaa
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
I would start w/ a set of manuals. They have step by step instructions on how to enter program mode. You need them anyway to understand the data entry process.
|
|
|
|
|
Joined: Feb 2004
Posts: 3
Member
|
|
Member
Joined: Feb 2004
Posts: 3 |
<font face="Verdana, Arial" size="2">Originally posted by DrPbx:
I would start w/ a set of manuals. They have step by step instructions on how to enter program mode. You need them anyway to understand the data entry process.</font> I have a manual for this system but with softwear version (generic 35ex12) my system s.w ver. is (generic 35ex3-03-06). i applay evry step for data entry in the manual witch i have but no result. i wich that you can help me.
ebrahim gomaa
|
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
The SX-50's all program the same, so the manuals you have are good to get started. Tell me the steps you are doing to enter program mode & I'll see if I can help. Hint: dip switches on the MCC card control password access to programming. Don't change the wrong one or you could default the system.
|
|
|
|
|
Joined: Feb 2004
Posts: 3
Member
|
|
Member
Joined: Feb 2004
Posts: 3 |
<font face="Verdana, Arial" size="2">Originally posted by DrPbx:
The SX-50's all program the same, so the manuals you have are good to get started. Tell me the steps you are doing to enter program mode & I'll see if I can help. Hint: dip switches on the MCC card control password access to programming. Don't change the wrong one or you could default the system.</font> the steps i am doing to enter program mode are: 1-the password is not 58 (result invalid) 2-i closed switch s1 in the mcc & dialed 58 (result invaled) 3- i pressed status switch in the consol repetedly until disblaid (generic 35ex3-03-06) then i hold & press any four digits then the generic word flashing then i press 58 withen 10seconds (result invalid) i am worry for defult the system
ebrahim gomaa
|
|
|
|
|
Joined: May 2004
Posts: 336
Member
|
|
Member
Joined: May 2004
Posts: 336 |
<font face="Verdana, Arial" size="2">Originally posted by ebrahim gomaa:
the steps i am doing to enter program mode are:
1-the password is not 58 (result invalid)
2-i closed switch s1 in the mcc & dialed 58 (result invaled)
3- i pressed status switch in the consol repetedly until disblaid (generic 35ex3-03-06) then i hold & press any four digits then the generic word flashing then i press 58 withen 10seconds (result invalid)
i am worry for defult the system
</font> hold the down the status key with your left hand. with right hand dial 7772. lift both hands and dial 70
|
|
|
|
Forums84
Topics94,551
Posts640,100
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
140
guests, and
19
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
