Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Mitel SX-50 Alarm Code issue
#114570 09/21/11 03:06 PM
Joined: Apr 2010
Posts: 24
jbo Offline OP
Member
OP Offline
Member
Joined: Apr 2010
Posts: 24
I have a mitel sx-50 with an alarm of A 13 0044 then a date of course.

I know that the 13 means to check wiring and found some corrosion at the wall, I am going to replace with a new termination block and wall plate and new jumper to phone.

The problem is, with the phone disconnected even at the 66 block I am still getting the error. Wouldn't the error go away if I have the wires disconnected at the 66 block then clear the error at the console.

Thanks
Jeremiah

Mitel search for systems, cards, phones, software, manuals and repairs!
Re: Mitel SX-50 Alarm Code issue
#114571 09/21/11 03:44 PM
Joined: Apr 2010
Posts: 24
jbo Offline OP
Member
OP Offline
Member
Joined: Apr 2010
Posts: 24
After thinking about this on the way home from the customer location maybe I have this wrong.

Does the 44 refer to the ext or the 44 pair of the 55 for room ext?

the ext at this location are 120-175

btw, not a mitel tech here just a telco guy trying to solve a problem for a friend.

Re: Mitel SX-50 Alarm Code issue
#114572 09/21/11 06:26 PM
Joined: May 2005
Posts: 997
Member
Offline
Member
Joined: May 2005
Posts: 997
Definately some sort of wiring problem, alarm 13 is a ring ground problem, 044 refers to the physical connection in slot 3 circuit 12. Could also be a problem with the card itself. You may try isolating the problem by going straight to the MDF and seeing if you have clean dial tone on that port (with jumper pulled).

Re: Mitel SX-50 Alarm Code issue
#114573 09/25/11 05:41 PM
Joined: Apr 2010
Posts: 24
jbo Offline OP
Member
OP Offline
Member
Joined: Apr 2010
Posts: 24
Thank you, that worked perfectly. That line was is currently unused and found the wire cut, pulled the jumper and cleared the alarm and all is good now.


Moderated by  DrPbx 

Link Copied to Clipboard
Forum Search
Most Recent 5 Post
NS1000 RENUMBER 600 and IDC GROUPS
by ronaldjamesh - 05/31/20 11:54 AM
Spam Canned Meat Varieties
by dexman - 05/30/20 01:37 AM
Partner ACS T1 module setup
by ChrisRR - 05/29/20 08:32 PM
SL1100/2100
by Derm J - 05/29/20 11:07 AM
APC SU1000XL Operating Question
by EV607797 - 05/28/20 07:34 AM
Who's Online Now
28 members (dude, dexman, JBean3329, morephones, nortelvoip, justbill, BobRobert, Carl Navarro, Arthur P. Bloom, RATHER BE FISHING, Professor Shadow, Yoda, hbiss, Ruben, OBT, mongo5150, Curlycord, Tip&Ring, Mercenary Roadie, pdxjim911, Touch Tone Tommy, ronaldjamesh, jeffmoss26, Serge, KRRath, gelehu, MooreTel, metelcom), 132 guests, and 37 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,729
Posts635,906
Members49,292
Most Online5,661
May 23rd, 2018
Today's Birthdays
Buckshot, finlover, hitech-redneck, kevhawk13, Lancomm Steve, sjohnson, techdudeben
Newest Members
swoodsNI, B. Endsley, Abner Dawes, Gringo, Jeffrey Cohen
49292 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 19
Bob-o 14
hbiss 11
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners