|
|
|
|
Joined: Jul 2011
Posts: 8
Member
|
OP
Member
Joined: Jul 2011
Posts: 8 |
We are currently trying to interface an Adtran 908e with Mitel PBX. Existing setup is a T1 direct to Mitel via Adtran616 and is working ok. What we are trying to do is use the Adtran908e E01 for WAN to register SIP trunks and the pass voice via one of the T1 ports on the Adtran T03 to the Mitel. Tech asked for D4, AMI, Wink and 4 digits. Adtran is config for this. We can see the link as UP after making crossover cable. No voice. Does anyone have a basic config for a 908e. Any assistance would be appreciated. Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,297
Posts638,867
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
123
guests, and
311
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
