|
|
Joined: Jul 2004
Posts: 3
Member
|
OP
Member
Joined: Jul 2004
Posts: 3 |
CAN ANYONE TELL ME OR POINT ME IN THE RIGHT DIRECTION TO REINITIALIZE A HANDSET TO A BASE. I BOUGHT A USED PHONE AND THE HANDSET DOES NOT RECOGNIZE THE BASE, THERE IS A WAY AND JUST CAN NOT REMEMBER HOW TO DO IT?
THANKS.
|
|
|
|
|
Joined: Apr 2002
Posts: 157
Member
|
|
Member
Joined: Apr 2002
Posts: 157 |
You need to set the handset ID which corresponds with the RJ11 jack on the back of the base station ( 1,2,3). Then you need to assign the handset to the base. Very easy if you follow the instructions in the T7406 Installation guide.
B
|
|
|
|
|
Joined: Aug 2003
Posts: 250
Member
|
|
Member
Joined: Aug 2003
Posts: 250 |
The above is correct for a T7406, but the M7410 handsets are matched to the host base.
|
|
|
|
|
Joined: Jul 2004
Posts: 7
Member
|
|
Member
Joined: Jul 2004
Posts: 7 |
I have a similar problem - used same battery for five years (no spare). Suddenly today the handset does not recognize it's buddy the base unit. Does battery condition/life have any bearing on "Invalid Handset" error. And how is Flash IC used to correct this problem?
Also - I have noticed handset occasionally ticks!
|
|
|
|
|
Joined: Sep 2004
Posts: 1
Member
|
|
Member
Joined: Sep 2004
Posts: 1 |
<font face="Verdana, Arial" size="2">Originally posted by MINM:
CAN ANYONE TELL ME OR POINT ME IN THE RIGHT DIRECTION TO REINITIALIZE A HANDSET TO A BASE. I BOUGHT A USED PHONE AND THE HANDSET DOES NOT RECOGNIZE THE BASE, THERE IS A WAY AND JUST CAN NOT REMEMBER HOW TO DO IT?
THANKS.</font> unplug the power and the line cord also the battery then one at a time plug line cord power put the handset to cradle make sure charge light is on then put the battery it should marry.... good luck
|
|
|
|
|
Joined: Mar 2005
Posts: 1
Member
|
|
Member
Joined: Mar 2005
Posts: 1 |
The handset CAN be matched to the base!
1) Put the handset in the cradle.
2) Unplug the power and line cord from the base unit
3) Wait 5 sec, reinstall cords with the handset in place.
4) Keep the handset on the base for 10 seconds, it’s now done.
------------------
Mike Watson
Wattronics Co.
Mike Watson
Wattronics Co.
|
|
|
|
Forums84
Topics93,881
Posts637,005
Members49,673
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/forum/frown.gif)
