M7410

Print Thread

Rate Thread

M7410 #121606 07/27/04 02:26 PM
Joined: Jul 2004 Posts: 3 VILONIA, AR, USA MINM Member
MINM Member Joined: Jul 2004 Posts: 3 VILONIA, AR, USA	CAN ANYONE TELL ME OR POINT ME IN THE RIGHT DIRECTION TO REINITIALIZE A HANDSET TO A BASE. I BOUGHT A USED PHONE AND THE HANDSET DOES NOT RECOGNIZE THE BASE, THERE IS A WAY AND JUST CAN NOT REMEMBER HOW TO DO IT? THANKS.

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: M7410 #121607 07/27/04 02:34 PM
Joined: May 2003 Posts: 1,362 PENSACOLA FLORIDA-U.S. JOHNYREB Member
JOHNYREB Member Joined: May 2003 Posts: 1,362 PENSACOLA FLORIDA-U.S.	From what I understand, this cannot easily be accomplished if at all by an end user or tech. More info can be found here.... https://www.sundance-communications.com/forum/Forum8/HTML/000481.html

Re: M7410 #121608 07/28/04 03:13 AM
Joined: Apr 2002 Posts: 157 Wheat Ridge,Co,USA bcousins Member
bcousins Member Joined: Apr 2002 Posts: 157 Wheat Ridge,Co,USA	You need to set the handset ID which corresponds with the RJ11 jack on the back of the base station ( 1,2,3). Then you need to assign the handset to the base. Very easy if you follow the instructions in the T7406 Installation guide. B

Re: M7410 #121609 07/30/04 05:35 AM
Joined: Aug 2003 Posts: 250 Marlton, NJ, USA telsetrepair Member
telsetrepair Member Joined: Aug 2003 Posts: 250 Marlton, NJ, USA	The above is correct for a T7406, but the M7410 handsets are matched to the host base. www.testtech.com

Re: M7410 #121610 08/03/04 12:51 PM
Joined: Jul 2004 Posts: 7 Carlsbad, CA, USA sbryant Member
sbryant Member Joined: Jul 2004 Posts: 7 Carlsbad, CA, USA	I have a similar problem - used same battery for five years (no spare). Suddenly today the handset does not recognize it's buddy the base unit. Does battery condition/life have any bearing on "Invalid Handset" error. And how is Flash IC used to correct this problem? Also - I have noticed handset occasionally ticks!

Re: M7410 #121611 09/13/04 05:57 AM
Joined: Sep 2004 Posts: 1 canada omni Member
omni Member Joined: Sep 2004 Posts: 1 canada	Quote <font face="Verdana, Arial" size="2">Originally posted by MINM: CAN ANYONE TELL ME OR POINT ME IN THE RIGHT DIRECTION TO REINITIALIZE A HANDSET TO A BASE. I BOUGHT A USED PHONE AND THE HANDSET DOES NOT RECOGNIZE THE BASE, THERE IS A WAY AND JUST CAN NOT REMEMBER HOW TO DO IT? THANKS.</font> unplug the power and the line cord also the battery then one at a time plug line cord power put the handset to cradle make sure charge light is on then put the battery it should marry.... good luck

Re: M7410 #121612 03/08/05 03:57 AM
Joined: Mar 2005 Posts: 1 Whittier Wattronics Member
Wattronics Member Joined: Mar 2005 Posts: 1 Whittier	The handset CAN be matched to the base! 1) Put the handset in the cradle. 2) Unplug the power and line cord from the base unit 3) Wait 5 sec, reinstall cords with the handset in place. 4) Keep the handset on the base for 10 seconds, itâ€™s now done. ------------------ Mike Watson Wattronics Co. Mike Watson Wattronics Co.

Moderated by MooreTel

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems M7410