|
|
|
|
Joined: Sep 2005
Posts: 22
Member
|
Member
Joined: Sep 2005
Posts: 22 |
I've upgraded two systems to v7.0 (the latest v6.1 didn't do the trick for me, or I didn't get the correct one from my supplier). One was regular, one was XC. Time will tell if it corrected the "No Free Lines" issue...but a weird new symptom emerged...DN 245 and 249 (Ports 0125 and 0129) are misbehaving. 245 says "CALLBACK" in the display all the time, and 249 goes off hook and stays there (no buttons work, including Rls, so you have to unplug the set to get it to reset). I have enough sets to move those two elsewhere for now...but it was weird that the same symptoms appeared on the same sets on two MICSs...anyone else see this? Any ideas??? Thanks!!!
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
This is the third or fourth post in the latest dozen posts that mention the same thing about 245 and 249.
7.0 is alpha software, not even beta from the number of different complaints and number of complaints about the same thing.
245 and 249 is software fault, not yours for sure.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
Forums84
Topics94,297
Posts638,854
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
155
guests, and
286
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
