|
|
|
|
Joined: Sep 2004
Posts: 10
Member
|
|
Member
Joined: Sep 2004
Posts: 10 |
My line two button on Nortel M7324 desk set stop working want to move line two button to line six slot ?how is this done?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Feb 2004
Posts: 454
Member
|
|
Member
Joined: Feb 2004
Posts: 454 |
|
|
|
|
|
Joined: Sep 2004
Posts: 10
Member
|
|
Member
Joined: Sep 2004
Posts: 10 |
line 2 button lost its program need to re program it to line 2
|
|
|
|
|
Joined: Feb 2004
Posts: 454
Member
|
|
Member
Joined: Feb 2004
Posts: 454 |
unless you removed the line from the phone it would still be there. i would remove all the lines from the phone. exit programming and let it update and then re-add the lines. i thought you just wanted to move line 2 to the line 6 spot. you do that with f*81
|
|
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
|
Member
Joined: Apr 2002
Posts: 1,101 |
bigjim, is this one of the phones that you did change DN on?
If so, you are going to have to go into programming and add that line back to phone. it can be either appear or appear and ring. Then you will need to move to the correct location.
Good Luck!!
If all else fails, use a BFH.
|
|
|
|
Forums84
Topics94,579
Posts640,263
Members49,878
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
281
guests, and
62
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
