|
|
|
|
Joined: May 2005
Posts: 5
Member
|
|
Member
Joined: May 2005
Posts: 5 |
How do I get into a Rad on a 0 x 32 with no DID access? I was told to dial the main numbers and get transfered to *90. Should I hear a modem tone if work correctly?
Thanks
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2005
Posts: 135
Member
|
|
Member
Joined: Apr 2005
Posts: 135 |
did you program the rad? Does the switch see the rad if you look at port/dn status? Is it a fast rad?
------------------
You don’t drown by falling in the water. You drown by staying there.
|
|
|
|
|
Joined: Apr 2005
Posts: 135
Member
|
|
Member
Joined: Apr 2005
Posts: 135 |
Also the code is F-9*0 not F-*90
You don’t drown by falling in the water. You drown by staying there.
|
|
|
|
|
Joined: May 2005
Posts: 5
Member
|
|
Member
Joined: May 2005
Posts: 5 |
I had the vendor install the RAD.
I guess my question is if I dial the Main number into the AA how do I access to F9*0.
This site has no DID access. AA with thru dial.
|
|
|
|
|
Joined: Jan 2005
Posts: 826
Member
|
|
Member
Joined: Jan 2005
Posts: 826 |
You can dial the Auto DN or DISA DN from the AA to get access via a COS password. When you hear the steady tone you enter ***RAD to gain access. I would recommend a Nortel dealer set this up so you can avoid the potential toll fraud mess. Good Luck! ------------------ BCM Guy www.BCMguy.com Learn more about the Nortel Networks Business Communications Manager HERE !
|
|
|
|
Forums84
Topics94,569
Posts640,193
Members49,871
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
27
guests, and
64
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
