|
|
|
|
Joined: Jul 2005
Posts: 6
Member
|
|
Member
Joined: Jul 2005
Posts: 6 |
Phone line is not getting disconnected when I hang the line with DISA enabled in it. I call from Home to a line connected to the Nortel system, I get a sluttered dial tone then I enter a COS pwd and then make a call. After I hang up the phone the line which I dialed to get sluttered tone does not disconnect. Disconnect supervision is enabled to that line, even then the line is not getting disconnected. Can someone please help me in fixing this issue.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Feb 2005
Posts: 25
Member
|
|
Member
Joined: Feb 2005
Posts: 25 |
What version of software? Are the lines Loop Start? Lines also have to have Disconnect supervision from the C.O. to function properly if programmed for loop. Also something to remember :"Tips - If loop start lines are set to Auto, you will require an
E&M card for the DTMF receivers to function properly."
------------------
When all else fails, Give someone else a try!
When all else fails, Give someone else a try!
|
|
|
|
Forums84
Topics94,514
Posts639,943
Members49,846
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (kenc),
278
guests, and
30
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
