|
|
|
|
Joined: Aug 2005
Posts: 1
Member
|
|
Member
Joined: Aug 2005
Posts: 1 |
I have a nortel norstar 0x32 with two PRI cards installed. We are running 6.1 XC software. Cox services my T1's.
Every morning (when call volumes are high) many callers receive a fast busy signal or sometimes a 'call cannot be completed' message. Cox has been on-site multiple times and it is verified we are not using all of our channels and all translations seem to be ok. The problem seems to occur when inbound calls attempt to rollover to the second T1.
Strangely, not every call that tries to rollover gets a busy signal, there are a few that do get through. This was verified by Cox watching the channels.
Cox says rolling over to the second T1 is working fine from their end because they plugged the second T1 into a meter and watched all the calls come into the meter.
HELP HELP HELP this is killing us. Any ideas would be appreciated.
Thanks,
Ryan
[This message has been edited by ryandale56 (edited August 16, 2005).]
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2005
Posts: 16
Member
|
|
Member
Joined: Apr 2005
Posts: 16 |
Are all 24 lines of T1 answered AA? If not,you should set every line to RING or APPR.
and,you need set 'line prime set'.
|
|
|
|
|
Joined: Jun 2005
Posts: 370
Member
|
|
Member
Joined: Jun 2005
Posts: 370 |
Hey Ryan, sorry about your problems. Would you mind filling out your profile. It can help those wishing to give you help.
Thanks
Stephanie
Do the job right the first time.
|
|
|
|
Forums84
Topics94,530
Posts640,035
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Toner, justbill),
480
guests, and
60
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
