Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 3 1 2 3
Display Waiting msg??
#129057 07/19/06 04:13 PM
Joined: Jul 2006
Posts: 21
BLK01S4 Offline OP
Member
OP Offline
Member
Joined: Jul 2006
Posts: 21
Hey guys wondering if you can help me out again .. I have 4 BCM 200s using CVM Callpilot. One bcm has all the mailboxes (Host) the others are just remote systems (Satallites) When there is a msg waiting in the mailbox for the person the remote end isn't getting a RED light indicating there is a msg waiting. Now I have enabled VMSG to Y and still nothing. How does the Remote system contact the host system to check for VMs? mad

Nortel Equipment and Telephones
Re: Display Waiting msg??
#129058 07/20/06 05:04 AM
Joined: Oct 2005
Posts: 4,681
Member
Offline
Member
Joined: Oct 2005
Posts: 4,681
The answer is the same as before. You can't send msg waiting over voip gateway. You need PTP PRI and the PRI keycode.


Marv CCNA, CTUB
TeleMarv Services
Providing telecommunication solutions in Ottawa Canada since 1990
http://www.telemarv.ca
Specializing in Nortel Norstar, BCM and Allworx VoIP Servers
Re: Display Waiting msg??
#129059 07/20/06 07:50 AM
Joined: Jul 2006
Posts: 11
Member
Offline
Member
Joined: Jul 2006
Posts: 11
actually you can, I found it by accident

VMsg set and Caller ID have to be checked for each line appearance (and target line)on each set

we're beta testing BCM 4.0 (which uses element manager like a 50)so I have forgotten the exact route to these options but I think you go:
DN>line access>line assignment>(Line XXX)>and there should be settings for CLID and VMSG set, check or set to yes

Make sure any target lines are Private, assigned to Appear or ring or both on the sets they target. (some techs like to set target lines to public and direct them to prime,Prime being the set) it's one of those great Nortel features that you find out how to use after getting bumped to second level tech support.

Re: Display Waiting msg??
#129060 08/03/06 12:28 PM
Joined: Jul 2006
Posts: 21
BLK01S4 Offline OP
Member
OP Offline
Member
Joined: Jul 2006
Posts: 21
Macdouglas thanks for the suggestion however it didn't work. Currently under General Settings - Network Services - MCDN I have TAT set to YES the rest set to NO .. Would any of this have anything to do with it?

Re: Display Waiting msg??
#129061 08/22/06 10:58 PM
Joined: Aug 2006
Posts: 11
Member
Offline
Member
Joined: Aug 2006
Posts: 11
Navigate to "Button Programming" and add a button called "Make MWI Work." It should be Feature 8901. ;o)


There are 10 types of people: Those who understand binary and those who don't.
Re: Display Waiting msg??
#129062 08/23/06 04:49 AM
Joined: Jan 2005
Posts: 826
Member
Offline
Member
Joined: Jan 2005
Posts: 826
MCDN definately works over IP. There are several things that could potentialy break the feature. Is everything else working, MCDN wise?


Marty Beutler
Follow me on my quest to webify all of us at Webify.Us
--> Providing Business Relevance for Web 2.0 Technologies
Re: Display Waiting msg??
#129063 08/23/06 04:53 AM
Joined: Aug 2006
Posts: 11
Member
Offline
Member
Joined: Aug 2006
Posts: 11
Here's the issue: As documented by Nortel, the BCMs do not support QSIG functionality over an IP trunk (with the CallPilot version that is on the BCMs). The only way that Nortel can tell us to fix it is to purchase an Option 11 and configure the call center options. The other option, which we are eval'ing is Message Networking under the CallPilot (VPIM & AMIS). Network Mailboxes might be the only way to go.


There are 10 types of people: Those who understand binary and those who don't.
Re: Display Waiting msg??
#129064 08/23/06 04:56 AM
Joined: Jan 2005
Posts: 826
Member
Offline
Member
Joined: Jan 2005
Posts: 826
Why QSIG? Are you networking with another vendor's equipment? If its all Nortel, use MCDN. It works for sure.


Marty Beutler
Follow me on my quest to webify all of us at Webify.Us
--> Providing Business Relevance for Web 2.0 Technologies
Re: Display Waiting msg??
#129065 08/23/06 05:09 AM
Joined: Aug 2006
Posts: 11
Member
Offline
Member
Joined: Aug 2006
Posts: 11
BCMguy - Check out page 171 of the following under the heading Message Waiting Indicator: https://www.brooksideus.com/reference/docs/bcm/bcm_handbook.pdf

The only thing that I can imagine is that the CallPilot version that runs on the BCM doesn't support the signaling for remote MWI.


There are 10 types of people: Those who understand binary and those who don't.
Re: Display Waiting msg??
#129066 08/23/06 05:26 AM
Joined: Jan 2005
Posts: 826
Member
Offline
Member
Joined: Jan 2005
Posts: 826
Thanks Matt! All of the systems that I was thinking of have CS1000s at the main site.

The Network Mailboxes are a possible solution I suppose, but kind of an ugly one. That's a bummer!


Marty Beutler
Follow me on my quest to webify all of us at Webify.Us
--> Providing Business Relevance for Web 2.0 Technologies
Page 1 of 3 1 2 3

Moderated by  MooreTel, NTlayoff, Z-man 

Link Copied to Clipboard
Forum Search
Most Recent 5 Post
You don't know Jack!
by Professor Shadow - 07/12/20 02:57 AM
SL2100 night mode switching
by teleco - 07/11/20 04:19 PM
Suttle Apparatus Acquisition.
by dexman - 07/11/20 03:59 AM
Headset in-use relay
by SST - 07/08/20 06:33 PM
Partner ACS AA
by mtncomm1 - 07/08/20 04:18 PM
Who's Online Now
32 members (Skunky, Curlycord, hitechcomm, Touch Tone Tommy, Mercenary Roadie, hbiss, dexman, Bob3470, Yoda, mongo5150, Professor Shadow, newtecky, Shelbyrich, usedphones, justbill, EV607797, Avidcomm, pvj, Carl Navarro, nortelvoip, metelcom, Ruben, BTS01, teleco, ThePhoneConnection, Stix1, RATHER BE FISHING, dans, vicbob, KRRath, LoonCreek, Coral Tech), 460 guests, and 50 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,809
Posts636,355
Members49,311
Most Online5,661
May 23rd, 2018
Today's Birthdays
hornet, LifesaverM, Old Dog No Tricks, Ryan Jones
Newest Members
StevCom, DaleG, jlspeck, Real Estating, ForestHillChurch
49310 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 23
dans 11
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners