|
|
|
|
Joined: Mar 2001
Posts: 3,268
Moderator-Allworx, Nisuko-Tie, Vodavi
|
OP
Moderator-Allworx, Nisuko-Tie, Vodavi
Joined: Mar 2001
Posts: 3,268 |
Last week we moved a DR5 616 and a Flash (2 port/4 channel) with Rel 1 2.0.02 Feat Card. All went as expected except for the Flash. It would not come up. A 7310 works on both ports (Ex 34 & 35 -ports 15 & 16. F983 has no response---nor do any of the F98_ feature codes. We replaced the unit, temporarily, with a Mini that we had as a test unit in our shop. It works at the location fine.
Back in our shop, I took the Flash apart and can find no physical problems that I can see.
The unit powers up but can't do anything else.
I replaced the Flash Card with Rel 03, but with the same results.
I have checked the Cap--it's running about 4.6 volts.
I have shorted out the cap and again, tried to get a F98_ response---but so far, no luck.
I must be missing something. Any direction would be appreciated.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: May 2007
Posts: 231
Member
|
|
Member
Joined: May 2007
Posts: 231 |
try i believe feature 903 and follow the upgrade procedure
After the Startalk boots up perform f 903
hit ok to high range
f 983 enter the password and press OK.
at key Press OK
at sys (password)press OK
Feature 983 can now be accessed with the System Coordinator password .
(Please don't post passwords...send a PM instead)
|
|
|
|
Forums84
Topics94,287
Posts638,793
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
142
guests, and
398
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
