|
Joined: Sep 2007
Posts: 115
Member
|
Member
Joined: Sep 2007
Posts: 115 |
Hello,
I have a telephony background but mainly with Inter-Tel. A new job has forced me to learn some Nortel. I need to make an extension move in an office. Basically move one extension to another location in the office.
Without any knowledge of Nortel can I assume that I can tone out the extension and punch it down to the person's new jack number (location). I should have no need to get into the programming system, correct?
Thank You,
Troy
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Mar 2007
Posts: 85
Member
|
Member
Joined: Mar 2007
Posts: 85 |
|
|
|
|
Joined: Apr 2007
Posts: 894
Member
|
Member
Joined: Apr 2007
Posts: 894 |
if the system has set relocation enabled you can simply move the telephone, this feature has been a headache and a help in some past situations for me!
Jay, a recovering IT guy
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
The preferred method is to move jumpers, but as stated above there is a set relocation feature on all Norstar systems.
Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Joined: Sep 2007
Posts: 115
Member
|
Member
Joined: Sep 2007
Posts: 115 |
Thanks for the posts. Very helpful. Set relocation feature? Can I ask how that works? Sounds like a programming feature in which the phone retains it's extension info when moved? Am I somewhat correct  I take it to enable it, you need to get into the programming (brain) of the system to enable it.
Thank You,
Troy
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Originally posted by yortmantup: Thanks for the posts. Very helpful. Set relocation feature? Can I ask how that works? Sounds like a programming feature in which the phone retains it's extension info when moved? Am I somewhat correct I take it to enable it, you need to get into the programming (brain) of the system to enable it. That is correct and it is enabled globally for the entire system not on a phone by phone basis.
Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Joined: Jun 2006
Posts: 8,735 Likes: 12
Moderator-Nortel, Computers, General
|
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,735 Likes: 12 |
By default it is set to YES, but most installers set it to NO, as it does cause headaches later on.
You will also need the appropriate p/w to verify +/or change the setting.
Dave
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons". Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
|
Joined: Sep 2007
Posts: 6
Member
|
Member
Joined: Sep 2007
Posts: 6 |
Move the jumper, dont use set relocation. It will cause many troubles for the next guy to work on the system. Customers will move the sets on there own and casue a real cluster !$!@#$#@$.
|
|
|
|
Joined: Apr 2007
Posts: 894
Member
|
Member
Joined: Apr 2007
Posts: 894 |
agreed on the set relocation, its handy on smaller systems but one of my customers has a campus where phones bite the dust after lightning and sometimes you end up with the recption extension ringing at the loading dock!
Jay, a recovering IT guy
|
|
|
|
Joined: Jun 2006
Posts: 8,735 Likes: 12
Moderator-Nortel, Computers, General
|
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,735 Likes: 12 |
Just had to deal with today for a system that had lost power over the w/e. Their UPS failed as did the Caps in the system. Over 50 extensions that defaulted as because some SOB had left that on when originally set up so I had to move the jumpers around to match their original extensions. 4 hours of income for me / expense for the client as their business cards had the extension numbers on them.
This is a huge manufacturing plant so I got my weeks worth of exercise today.
Move the jumpers and help out the client.
Dave
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons". Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
Forums84
Topics94,514
Posts639,941
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
231
guests, and
24
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|