|
|
|
|
Joined: Jun 2005
Posts: 139
Member
|
|
Member
Joined: Jun 2005
Posts: 139 |
IM pretty sure but correct me if im wrong is there any version of mics that will support 2 digit dn length? thanx in advance everybody in this forum are very helpful and fast in responses.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
All MICS will support 2 digit DN, however you lose funtionality, expandabilty and it's not recommended.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Jun 2005
Posts: 139
Member
|
|
Member
Joined: Jun 2005
Posts: 139 |
in what section would i find it. cuz in sys prog and dn legnth only lets me change from 3 to 7 could you point me in the right direction? id really appreciate it. the customer insists on 2 digit dn. thanx again.
|
|
|
|
|
Joined: Jan 2008
Posts: 3
Member
|
|
Member
Joined: Jan 2008
Posts: 3 |
You will probably have to do a system start up. And bring it up with 2 digit starting DN.
CPI guy
|
|
|
|
|
Joined: Jun 2005
Posts: 139
Member
|
|
Member
Joined: Jun 2005
Posts: 139 |
it dont like when i try to start with 2 digits it is always looking for the 3rd digit when i go thru the startup procedure. im begining to think this cannot be done.
|
|
|
|
|
Joined: Aug 2004
Posts: 9,172 Likes: 22
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,172 Likes: 22 |
It will work..Do a startup and define the starting DN as 21.
|
|
|
|
|
Joined: Jan 2008
Posts: 3
Member
|
|
Member
Joined: Jan 2008
Posts: 3 |
Your right I have 7.0 and here and it does require 3 digit. It can be done on a compact but I don't think so on a modular.
CPI guy
|
|
|
|
|
Joined: Jun 2005
Posts: 139
Member
|
|
Member
Joined: Jun 2005
Posts: 139 |
if i try to put 2 digits it is waiting for the 3rd digit it will not let me go next. i think that is just a cics thing.
|
|
|
|
|
Joined: Aug 2004
Posts: 9,172 Likes: 22
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,172 Likes: 22 |
What software release do you have? This may have changed in later versions. 2 digit DNs in a MICS are pretty rare so this may have have been changed somewhere along the line and you may the first to notice it.
|
|
|
|
|
Joined: Jun 2005
Posts: 139
Member
|
|
Member
Joined: Jun 2005
Posts: 139 |
i tried it all the way down to a 3.0 and still get the same thing.
|
|
|
|
Forums84
Topics94,518
Posts639,975
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)