|
|
|
|
Joined: Apr 2007
Posts: 36
Member
|
OP
Member
Joined: Apr 2007
Posts: 36 |
I need to upgrade software AND NVRAM on an MICS 7.0 to 7.1 with three PRI's and CallCenter Enhanced.
I read (I think in this board) rule of thumb is upgrade software before hardware.
1.What are the chances of changing system ID?
2.Any suggestions as a backup plan if System ID changes? (I remember reading somewhere a PRI will work configured as a T1, just missing Caller ID and some other features)
Any tips/suggestions would be appreciated!!
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Aug 2006
Posts: 254
Member
|
|
Member
Joined: Aug 2006
Posts: 254 |
The install manual says to install software before hardware if your adding both. Can't answer the other questions, sorry.
|
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
Software upgrade is not gonna change your system ID and all programming would be not effected. CC is the callPilot option and has nothing to do with your upgrade. The hall upgrade is to change a Flash Memory card.
|
|
|
|
|
Joined: Dec 2004
Posts: 38
Member
|
|
Member
Joined: Dec 2004
Posts: 38 |
Also if you are adding three PRIs there is a revision card ending in AAA that I believe has to be the third PRI card or else it will not work.
|
|
|
|
Forums84
Topics94,297
Posts638,858
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
148
guests, and
265
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
