web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#143123 05/01/09 05:22 AM
Joined: Aug 2003
Posts: 48
Member
Member
Offline
Joined: Aug 2003
Posts: 48
need some info on how to set this up; i am familiar w/ setting up regular tie lines but not isdn pri tie w/ dch. any help appreciated. using this for ext dialing and that's all.


quit using mollies to hang wall phones!!!
Nortel Phone System Service
VoIP Demo

Nortel Phone System Service in Canada


Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Joined: Aug 2004
Posts: 9,172
Likes: 22
Admin
*****
Admin
*****
Joined: Aug 2004
Posts: 9,172
Likes: 22
You'll have to build your D channel info first in LD 17. You'll then build your route. Build a 23 channel digital loop and assign those members to the previous built route. You'll have to figure out if the systems have CDP. If not equipped with CDP your customer will have to dial a trunk ACOD to pull dialtone from far end.


[Linked Image]
Joined: Aug 2003
Posts: 48
Member
Member
Offline
Joined: Aug 2003
Posts: 48
thanks; i know we'll have to use cdp, but i heard somewhere that i have to have software that enables the d-channel. is this true? and also do i need to have a cards installed in order to program or can i program before? so sorry but very noob to this.


quit using mollies to hang wall phones!!!
Joined: Aug 2004
Posts: 9,172
Likes: 22
Admin
*****
Admin
*****
Joined: Aug 2004
Posts: 9,172
Likes: 22
You must have PRI and ISDN software in your package.

LD 22/20

REQ PRT
TYPE PKG

If you have the software you can preprogram but won't be able to test and will get constant hardware errors.


[Linked Image]
Joined: Aug 2003
Posts: 48
Member
Member
Offline
Joined: Aug 2003
Posts: 48
thanks, i will need to upgrade.


quit using mollies to hang wall phones!!!
Joined: Jul 2007
Posts: 6
Member
Member
Offline
Joined: Jul 2007
Posts: 6
Don't want to hijack the post, but its a pretty appropriate place to post my issue.

I have a PRI TIE from 81c to a CICS. I have the PRI/ISDN software loaded. All works pretty well, but periodically, I get a [PRI241 DCH XX DATA:0000017] error on the 81C and the CICs users experience dead air calls.

Does anyone have a print out of a working PRI from a larger switch to the CIC?


Moderated by  MooreTel 

Link Copied to Clipboard
Newest Topics
Samsung xchange server
by scanjet - 04/07/25 06:37 PM
NEC IP Phones
by juno - 04/04/25 09:05 AM
NEC IP phones rebooting
by jpet621 - 04/03/25 03:03 PM
SV9100 store hours mailbox
by muddybl - 04/03/25 02:10 PM
Forum Statistics
Forums84
Topics94,513
Posts639,939
Members49,844
Most Online5,661
May 23rd, 2018
Newest Members
yeloshak, ty3995, Sippy, sersmith, Taddeo
49,844 Registered Users
Top Posters(30 Days)
Toner 8
Taddeo 6
dexman 3
Who's Online Now
0 members (), 143 guests, and 46 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0