|
|
Joined: Aug 2003
Posts: 48
Member
|
Member
Joined: Aug 2003
Posts: 48 |
need some info on how to set this up; i am familiar w/ setting up regular tie lines but not isdn pri tie w/ dch. any help appreciated. using this for ext dialing and that's all.
quit using mollies to hang wall phones!!!
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Aug 2004
Posts: 9,172 Likes: 22
Admin
|
Admin
Joined: Aug 2004
Posts: 9,172 Likes: 22 |
You'll have to build your D channel info first in LD 17. You'll then build your route. Build a 23 channel digital loop and assign those members to the previous built route. You'll have to figure out if the systems have CDP. If not equipped with CDP your customer will have to dial a trunk ACOD to pull dialtone from far end.
|
|
|
|
Joined: Aug 2003
Posts: 48
Member
|
Member
Joined: Aug 2003
Posts: 48 |
thanks; i know we'll have to use cdp, but i heard somewhere that i have to have software that enables the d-channel. is this true? and also do i need to have a cards installed in order to program or can i program before? so sorry but very noob to this.
quit using mollies to hang wall phones!!!
|
|
|
|
Joined: Aug 2004
Posts: 9,172 Likes: 22
Admin
|
Admin
Joined: Aug 2004
Posts: 9,172 Likes: 22 |
You must have PRI and ISDN software in your package.
LD 22/20
REQ PRT TYPE PKG
If you have the software you can preprogram but won't be able to test and will get constant hardware errors.
|
|
|
|
Joined: Aug 2003
Posts: 48
Member
|
Member
Joined: Aug 2003
Posts: 48 |
thanks, i will need to upgrade.
quit using mollies to hang wall phones!!!
|
|
|
|
Joined: Jul 2007
Posts: 6
Member
|
Member
Joined: Jul 2007
Posts: 6 |
Don't want to hijack the post, but its a pretty appropriate place to post my issue.
I have a PRI TIE from 81c to a CICS. I have the PRI/ISDN software loaded. All works pretty well, but periodically, I get a [PRI241 DCH XX DATA:0000017] error on the 81C and the CICs users experience dead air calls.
Does anyone have a print out of a working PRI from a larger switch to the CIC?
|
|
|
Forums84
Topics94,513
Posts639,939
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
222
guests, and
31
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|