|
|
Joined: Jun 2005
Posts: 512
Member
|
|
Member
Joined: Jun 2005
Posts: 512 |
I have a Norstar Plus Modular ICS which I need to slot a PRI card and configure for ISDN so we can integrate it with another phone system. Can the card be slotted hot or does the system need to be powered down? Also programing a trunk and PRI card thru the phone??? Is there a console so I don't have to do programing thru the phone?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Aug 2004
Posts: 1,745 Likes: 49
Admin
|
|
Admin
Joined: Aug 2004
Posts: 1,745 Likes: 49 |
The card should not be installed hot - doing so may cause the system to reboot (I've experienced this 1st hand)
The programming is done through the phone. There is computer software but it's essentially the same as using a telephone. The programming is all in English but if you're not familiar with the system you should hire a Nortel tech to assist you for an hour or two.
![[Linked Image from web.atcomsystems.ca]](https://web.atcomsystems.ca/pic/atcom_logo_60px-high.png) Looking for a VoIP Phone Canada provider? Put Atcom's valuable VoIP expertise to work for your business today!
|
|
|
|
|
Joined: Jun 2005
Posts: 512
Member
|
|
Member
Joined: Jun 2005
Posts: 512 |
I have the card installed, do I enable the card thru the maintenace?
|
|
|
|
|
Joined: Jun 2005
Posts: 512
Member
|
|
Member
Joined: Jun 2005
Posts: 512 |
I provisioned the DTI card for PRI thru the hardware option.
|
|
|
|
|
Joined: Jan 2010
Posts: 18
Member
|
|
Member
Joined: Jan 2010
Posts: 18 |
When changing the setting of the digital trunk card you need to disable the card in maintenance. When done changing the setting in hardware, enable the card back in maintenance.
|
|
|
|
|
Joined: May 2007
Posts: 231
Member
|
|
Member
Joined: May 2007
Posts: 231 |
Do we have a combo/service card for the clocking??
|
|
|
|
|
Joined: Jun 2005
Posts: 512
Member
|
|
Member
Joined: Jun 2005
Posts: 512 |
But if it is a new card and was just slotted isnt it disable anyway?
|
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
Originally posted by mgere:
But if it is a new card and was just slotted isnt it disable anyway? It doesn't matter. Disable the card anyway. That way if it WAS already disabled you just verified the correct way to do it. And you need it disabled to Configure the card.
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
|
Joined: Jun 2005
Posts: 512
Member
|
|
Member
Joined: Jun 2005
Posts: 512 |
DTI cards can slot into the first slot of TM mods can't they??? Not just the main ics cabinet correct?
|
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
Originally posted by mgere:
DTI cards can slot into the first slot of TM mods can't they??? Not just the main ics cabinet correct? You should check out the manual. It says: Tips - For systems running 6.0 or greater software, a DTI card can be installed off-core on Module 3 or 4 on the Midi system, or module 7 or 8 on the Maxi system to expand the PRI capability of your system. This card is only supported on Profile 1 and 4. Note: Legacy DTI cards cannot be used off-core. A new DTI card was released in 2002 that can be used in any position. (listed above)
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
Forums84
Topics94,515
Posts639,961
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
