|
Joined: Oct 2005
Posts: 116
Member
|
OP
Member
Joined: Oct 2005
Posts: 116 |
I have a customer with 2 systems at 2 locations. Panasonic TDA100 with TVA50 voicemail and a Nortel MICS 7.0 with Call pilot 100 voicemail. My customer loves the fact that they can send emails when they receive a message on their panasonic voicemail, they want to know if the Nortel call pilot can do the same thing? Is their a lan board interface and software upgrade that will accomplish this? any feedback would be appreciated. :toast: Tj
|
|
|
|
Joined: Aug 2004
Posts: 1,475 Likes: 13
Admin
|
Admin
Joined: Aug 2004
Posts: 1,475 Likes: 13 |
The short answer is no. However, you can purchase Unified Messaging keycodes and have voicemails show up in the user's Outlook. It's different from the Panasonic in that the voicemail doesn't "send" and email using an SMTP server - you can't send the email to just any address.
The Ethernet port is built into Call Pilots.
|
|
|
|
Joined: Oct 2005
Posts: 116
Member
|
OP
Member
Joined: Oct 2005
Posts: 116 |
Thanks, I've been using the ethernet port for programming, I was hoping that it could do more. I will look into the unified messaging keycodes.
Tj
|
|
|
|
Joined: Oct 2005
Posts: 116
Member
|
OP
Member
Joined: Oct 2005
Posts: 116 |
just found out from my supplier that the UM keycodes are not available on the CP100 but that the CP150 has 2 builtin and that they can purchase more. I need to convince my customer to upgrade.
Tj
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Originally posted by TJMCAPS: just found out from my supplier that the UM keycodes are not available on the CP100 but that the CP150 has 2 builtin and that they can purchase more. I need to convince my customer to upgrade.
Tj Your "supplier" is incorrect.
Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Joined: Sep 2007
Posts: 26
Member
|
Member
Joined: Sep 2007
Posts: 26 |
Please keep in mind the network port will need to be programed in the same subnet and the network not default of 10.10.10.1
|
|
|
Forums84
Topics93,876
Posts636,983
Members49,670
|
Most Online5,661 May 23rd, 2018
|
|
2 members (nonameyet, teleco),
71
guests, and
18
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|