MICS programming software?

Print Thread

Rate Thread

MICS programming software? #146056 03/03/10 08:41 AM
Joined: Jul 2006 Posts: 728 Texas TadiranTechTexas Member
TadiranTechTexas Member Joined: Jul 2006 Posts: 728 Texas	I picked up a customer that has a MICS with PRI. Is there programming software that is used to program?

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: MICS programming software? #146057 03/03/10 08:48 AM
Joined: Aug 2002 Posts: 1,088 Likes: 2 Union NJ jsaad Member
jsaad Member Joined: Aug 2002 Posts: 1,088 Likes: 2 Union NJ	Norstar ICS Remote Tools is the software but a phone (M7310 or t7316) is much faster and easier. Phone systems for NJ and NY businesses

Re: MICS programming software? #146058 03/03/10 11:00 AM
Joined: Jun 2005 Posts: 2,256 Commerce, Ga USA rich30529 Member
rich30529 Member Joined: Jun 2005 Posts: 2,256 Commerce, Ga USA	The only time NRU comes in handy for Nortel is for backup/restore and remote access. If onsite the set programming is the method to use. As Jsaad stated, NRU only brings open a window with a M7310 or M7324 set. So either way, you're going to be using a set to program the system. Richard AVAYA-NORTEL-SAMSUNG-PANASONIC-MITEL www.acceleratedtelecom.com

Re: MICS programming software? #146059 03/04/10 07:46 AM
Joined: Jul 2006 Posts: 728 Texas TadiranTechTexas Member
TadiranTechTexas Member Joined: Jul 2006 Posts: 728 Texas	Thanks a million.

Re: MICS programming software? #146060 03/04/10 10:58 AM
Joined: Apr 2001 Posts: 1,390 AZ rustynails Member
rustynails Member Joined: Apr 2001 Posts: 1,390 AZ	Quote Originally posted by rich30529: The only time NRU comes in handy for Nortel is for backup/restore and remote access. If on site the set programming is the method to use. As Jsaad stated, NRU only brings open a window with a M7310 or M7324 set. So either way, you're going to be using a set to program the system. Actually there a three forms of programming methods for NRU. Remote set, Tree, and excel. I agree on small deployments the tool does not help unless you are doing remote programming. However on larger deployments, with DIDs, I suggests you use the Tree programmer. This tool is immensely helpful for local programming; allowing to rapidly move from one field to another and often displaying several programming changes in one screen shot. ...check it out!

Moderated by MooreTel

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems MICS programming software?