|
Joined: Sep 2008
Posts: 26
Member
|
Member
Joined: Sep 2008
Posts: 26 |
I have a client that needs to have the Auto Attendant set up based on time. It only needs to answer after hours and when it picks up I need them to have the option to press 1 and it will dial/forward them to the answering service. Otherwise it will allow them to leave VM or try to reach internal extensions.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
What you are asking is not too dificult. You will need access to both the phone system and the voice mail.
We will need more information as to make and model of the system.
Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Joined: Sep 2008
Posts: 26
Member
|
Member
Joined: Sep 2008
Posts: 26 |
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Joined: Sep 2008
Posts: 26
Member
|
Member
Joined: Sep 2008
Posts: 26 |
|
|
|
|
Joined: Feb 2005
Posts: 1,615 Likes: 1
Member
|
Member
Joined: Feb 2005
Posts: 1,615 Likes: 1 |
You need to setup Service Modes by adding members and selecting Auto and the times.
Option 1 you need to set it to Trasnfer/Ext and try # in front of your phone number.
|
|
|
|
Joined: Sep 2008
Posts: 26
Member
|
Member
Joined: Sep 2008
Posts: 26 |
Can this be done through the web GUI? At this time that is all I have access to. I do not see Service Modes there.
|
|
|
|
Joined: Feb 2005
Posts: 1,615 Likes: 1
Member
|
Member
Joined: Feb 2005
Posts: 1,615 Likes: 1 |
There is no web GUI for CICS, only Call Pilots. You need to do via Telet or NRU software.
Service Modes is phone system programming and not Call Pilot.
Since your not aware of this you should call a tech in to do it, 1 hour charge.
|
|
|
|
Joined: Sep 2008
Posts: 26
Member
|
Member
Joined: Sep 2008
Posts: 26 |
I understand that, but if the Auto Attendant isn't configured, what do I need to do on that side of things. I can go onsite and handle the service modes, but does anything need to be configured on the Call Pilot?
|
|
|
|
Joined: Feb 2005
Posts: 1,615 Likes: 1
Member
|
Member
Joined: Feb 2005
Posts: 1,615 Likes: 1 |
On voice mail side - Setup your CCR Tree and Path 1 to Transfer out to your outside number.
|
|
|
Forums84
Topics94,543
Posts640,074
Members49,857
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
263
guests, and
37
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|