web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#149736 10/18/11 02:05 PM
Joined: Jul 2005
Posts: 1,829
Member
*****
OP Offline
Member
*****
Joined: Jul 2005
Posts: 1,829
i usually don't work on these,but i went on a call and found on the the pri cards is defective
i ordered a new one now can i hotswap the card on an option 11 or i have to power down
thanks

Nortel Phone System Service
VoIP Demo

Nortel Phone System Service in Canada


Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

#149737 10/18/11 02:28 PM
Joined: Aug 2004
Posts: 9,155
Likes: 16
Admin
*****
Offline
Admin
*****
Joined: Aug 2004
Posts: 9,155
Likes: 16
Hotswap it.


[Linked Image]
#149738 10/18/11 03:01 PM
Joined: Jul 2005
Posts: 1,829
Member
*****
OP Offline
Member
*****
Joined: Jul 2005
Posts: 1,829
thank you i rather ask than see smoke

#149739 10/18/11 03:40 PM
Joined: Aug 2004
Posts: 9,155
Likes: 16
Admin
*****
Offline
Admin
*****
Joined: Aug 2004
Posts: 9,155
Likes: 16
All Nortel cards that will release smoke on hotswap have a warning label- Power must be turned off before card is inserted.


[Linked Image]
#149740 10/18/11 04:57 PM
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
Offline
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086
Of course the proper way is to disable the card FIRST in the software.
Once it is properly disabled, then you may HOTSWAP.
Then of course re-enable the card.


If CON is the opposite of PRO
Then what is the opposite of Progress?
#149741 10/19/11 01:31 AM
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
*****
Offline
Moderator-Comdial
*****
Joined: Jan 2002
Posts: 2,328
The TMDI cards are more tolerant than the DTI/PRI cards. Know your loads in case you have to enable the loop or bump the d channel.

#149742 10/19/11 10:52 AM
Joined: Jul 2005
Posts: 1,829
Member
*****
OP Offline
Member
*****
Joined: Jul 2005
Posts: 1,829
well the guy that takes care of this client is in the usa,i just went there cause their pri was down i saw that they had to pri cards one had red lights on them so i powered the system down since they were already down i swapped the cards and powered back up they told me that the 2nd pri card is for overflow only if onother of their site would go down they would re route the calls to this place i don't know this system to disable the cards so if i power down and swap the card i should be good/???

#149743 10/19/11 01:06 PM
Joined: Aug 2004
Posts: 9,155
Likes: 16
Admin
*****
Offline
Admin
*****
Joined: Aug 2004
Posts: 9,155
Likes: 16
It will reestablish if the circuit is good. You have to determine what red LED was on as that will tell if the card is disabled or in RED alarm. You may also have piggyback cards on the circuit pack to replace depending on which model it is.


[Linked Image]
#149744 10/27/11 12:39 PM
Joined: Oct 2011
Posts: 8
Member
Offline
Member
Joined: Oct 2011
Posts: 8
Yes, go to LD 96
Dis DCH X (X= DCH#)

Then LD 60

DISL X (X= PRI loop)

STAT X (X= PRI loop)

It shaould say Loop X DSLB

The light on the old card should turn red.
remove old/insert new
LD 60 ENLU X (X= PRI loop)

STAT x (X= PRI loop)

you should see the loop enabled and up and the channels IDLE

then type SSCK 0

make sure the clocking is trtacking correctly

then type LCNT

look at the errors..
then type RCNT
to reset the counts ( you will get errors when taking the card oos..

Ed


Moderated by  MooreTel 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,693
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,096 Shoretel
187,702 CTX100 install
186,790 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
Who's Online Now
0 members (), 107 guests, and 245 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5