sundance-communications.com Forums Telephony Discussion Phone & VoIP Systems Panasonic Telephones & Systems What is the best programming software for PANASONIC KX-TA systems

I want to buy programing software for the KX-TA 1232, 624 etc ... that is easy to use any suggestions would be welcome.

I have been looking at Programator and it looks good, but is there anything else.

TIA
fonetec

Panasonic has not released any software. I dont think you can program the ta systems with software. As far as I know the rs232 port is only for a printer. programming via the phone is easy just takes a few minutes. Stay away from the programarator

Hope this helps.

slim

Slim is absolutely right.
There small systems anyway and programming through the admin set really does not take much time.

I tried there voicemail master on a TVS 50 and it seemed to work pretty well, thats why I was wondering about the programator.

Also thanks for your help on that TVS 50 MrGemini.

fonetec

there is software for dealers for the ta1232. you may want to contact a distributor to see if they can get it for you. the ta systems do not require certification so I wouldn't see why panasonic would restrict the software. i don't recommend voicemail master or programmator. i am pretty sure i've made that clear in several posts.
the voicemails all program very simply and easily with hyperterminal. no reason to buy software when you already have everything you need. the manual is pretty straight forward as well on setting up the unit. programmator corrupts the software in the ksu. the 624 is small enough to program from the phone and the system comes with all the books and manuals so it is pretty straight forward. i would check into the software on the ta1232 though. i'll ask my rep as well. if they allow it then i'll download and email to you.

I sent you a email HtownDan.

TIA
fonetec

Dan, Slim; I stand corrected!
There is a dos tool for back-up & restore only
for the TA 1232 and there is also a windows based programming tool for the TA 1232.
But only for the TA1232, nothing for the TA624.
Both are from Panasonic direct to their dealers.
My apologies, I really don't do much in the way of analog.
Gem.

I too don't do much analog but have the programming tool on my laptop just in case i run across one. I found out from my panasonic rep that it is open to anyone that wants it. for those that do want it. i'll have it on my site for a short period of time to download. REMEMBER THIS IS FOR THE KX-TA1232 not the TD. ANALOG VERSION ONLY.

www.turnkeycom.com/FTP

Tanx HtownDan

Got it !!!!!!!!!!!!!

HtownDan I just went to the b2b site and sure enough it was there. I dont do too many of the analog so i guess i jumped the gun on that one. If you ever need anything in the North Carolina are let me know.