|
|
|
|
Joined: Jun 2005
Posts: 1
Member
|
OP
Member
Joined: Jun 2005
Posts: 1 |
After a power outage, my voice system doesn't work. It turns on, the power light blinks and then it stops "trying". The power light blinks 4 times every 10 seconds or so. I tried resetting to switch 5 without any change in the blink pattern ...
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2004
Posts: 684
Member
|
|
Member
Joined: Oct 2004
Posts: 684 |
not sure what originally stopped your system. But if you power cycled the unit with the dipswitch in 5 you erased everything and it will need to be reprogrammed. I would call your Telephone Vendor.
|
|
|
|
|
Joined: May 2004
Posts: 324
Member
|
|
Member
Joined: May 2004
Posts: 324 |
sounds like the hardrive has stuck if you restart the system and tap on the h/drive while it is starting this should get it going again get your coms person to do this but now that you have reset the switch to 5 and restarted you may have to reprog the v/mail ..
peter
|
|
|
|
|
Joined: Oct 2001
Posts: 4,043
Member
|
|
Member
Joined: Oct 2001
Posts: 4,043 |
a steady flashing means ther is no connection to the switch. If it flashes and stops and flashes and stops you probably lost the drive. You can try defaulting it and reprogramming from scratch but I doubt it will work. Give Joe a call at https://www.austintele.com/ he may be able to help you out. Gem
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
183
guests, and
346
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
