web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#165176 10/14/09 04:43 AM
Joined: Dec 2005
Posts: 2,928
Member
Member
Joined: Dec 2005
Posts: 2,928
We have kind of a weird one. Intermittently both if the csr door phones will just stop working. They may work for a week, then die for two, then come back up. It does not seem to be weather related. The cabling was tested and seems ok, the card was also replaced. I do not think the door phones were replaced yet. Both of them go out and come up at the same time. Any suggestions as to what can cause this?


I Swear I did not touch anything bash
Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#165177 10/14/09 06:21 AM
Joined: Jan 2007
Posts: 2,125
Likes: 4
OBT Offline
Admin
*****
Admin
*****
Joined: Jan 2007
Posts: 2,125
Likes: 4
If the 2 of them stop at the same time, it would suggest its not the door box's. could the system be put in do night/lunch mode and the units are not programmed for the time services?


“I have not failed. I've just found 10,000 ways that won't work.”
#165178 10/14/09 04:19 PM
Joined: Dec 2005
Posts: 2,928
Member
Member
Joined: Dec 2005
Posts: 2,928
OBt thanks I will double check but i do not think so..this thing will work fine for a few weeks then crap out then come back on really odd


I Swear I did not touch anything bash
#165179 10/14/09 04:23 PM
Joined: Dec 2004
Posts: 5,722
KLD Offline
Member
Member
Joined: Dec 2004
Posts: 5,722
Sounds like a port problem....Pana ports sometimes "heal" themselves.

Just a thought....or it could be power related....

Just guesses..... :shrug:


Ken
---------
#165180 10/15/09 06:08 AM
Joined: Dec 2005
Posts: 2,928
Member
Member
Joined: Dec 2005
Posts: 2,928
Thanks Ken,
The rest of the system stays up so I do not think it is power. I am thinking bad port as well. I think they are just going to bypass the whole door card and just using some vikig boxs with a ring down to a spare co


I Swear I did not touch anything bash
#165181 10/15/09 08:52 AM
Joined: May 2004
Posts: 324
Member
Member
Offline
Joined: May 2004
Posts: 324
OBT it right it is unlikely both door intercoms would go at the same time it is more probable that one of them is gone faulty and when pressed a certain way causes the port on the system to short out, and when another person presses again it releases the switch breaking the short.
replace one of them if the fault returns move it to the other.

peter (www.vpi.ie|)

#165182 10/15/09 09:02 AM
Joined: Dec 2005
Posts: 2,928
Member
Member
Joined: Dec 2005
Posts: 2,928
both door phones have also been replaced, as well as the card...really odd situation


I Swear I did not touch anything bash
#165183 10/15/09 12:12 PM
Joined: Oct 2001
Posts: 4,043
Member
Member
Offline
Joined: Oct 2001
Posts: 4,043
I think Peter's on to something Anthony, have you tried using just one of them connected for a while.
Also, are you using the contacts for a release?
Sometimes you can get "backlash" from a strike
or gate control relay.
---------------------
MrG

#165184 10/15/09 12:27 PM
Joined: Dec 2005
Posts: 2,928
Member
Member
Joined: Dec 2005
Posts: 2,928
None of the contact are being used as a release...i will need to confirm if the door boxs were ever swapped out. I am helping a friend out on this, it is his inherited client so the details I am getting are a little sketchy. He know the door card was replaced he was not sure about the phones...He is going on sire next week, I think I will take a ride with hi, and get back to you guys.

Thanks for all the tips


I Swear I did not touch anything bash
#165185 10/15/09 02:10 PM
Joined: Mar 2009
Posts: 238
Member
Member
Offline
Joined: Mar 2009
Posts: 238
This is kind of a long shot, but maybe the connector on the doorphone adapter to ksu isn't quite seated properly, and thus the intermittent operation. I've seen where the ksu was mounted (poorly) on a common wall with a door, and when the door was slammed, the connector would "unseat".

Page 1 of 2 1 2

Moderated by  Carl Navarro, OBT 

Link Copied to Clipboard
Newest Topics
Vertical door phone
by newtecky - 05/23/25 07:15 PM
TDM Phone System
by teldata1 - 05/22/25 02:35 PM
IPOFFICE 500
by Not_sirius - 05/20/25 08:15 PM
cat 6 cabling failed to certifiy
by jacktel - 05/18/25 05:55 AM
Forum Statistics
Forums84
Topics94,531
Posts640,038
Members49,852
Most Online5,661
May 23rd, 2018
Newest Members
Marcgyver, DEN2MM, ferhat_efe, utec, MoverDub
49,852 Registered Users
Top Posters(30 Days)
Toner 5
hbiss 4
Who's Online Now
1 members (justbill), 268 guests, and 58 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0