|
|
|
|
Joined: Jul 2011
Posts: 4
Member
|
|
Member
Joined: Jul 2011
Posts: 4 |
I NEED HELP WITH ASSIGNING A CO TO THE AUTO 9 DIALING
THE KSU PICKS CO-3 EVERYTIME I DIAL 9, AND I NEED TO CHANGE IT TO CO-1 OR CO-2
ANY HELP ?
THANK YOU
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2009
Posts: 1,118
Member
|
|
Member
Joined: Aug 2009
Posts: 1,118 |
do you have manuals for the 824 ?
|
|
|
|
|
Joined: Jul 2011
Posts: 4
Member
|
|
Member
Joined: Jul 2011
Posts: 4 |
yes i do but i cannot find the proper command.
|
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
|
Member
Joined: May 2003
Posts: 2,924 |
|
|
|
|
|
Joined: Jul 2011
Posts: 4
Member
|
|
Member
Joined: Jul 2011
Posts: 4 |
i have on ext 108 a phone dialer, for pbx it dials 9 for outside line.
the ksu 824 it assigns co-3 wich is used for satcom phone . i need to assign it to co-2 or co-1
i am not that good with understanding panasonics lingo in the manual
|
|
|
|
|
Joined: Jul 2011
Posts: 4
Member
|
|
Member
Joined: Jul 2011
Posts: 4 |
i have on ext 108 a phone dialer, for pbx it dials 9 for outside line.
the ksu 824 it assigns co-3 wich is used for satcom phone . i need to assign it to co-2 or co-1
i am not that good with understanding panasonics lingo in the manual
|
|
|
|
|
Joined: Jul 2006
Posts: 2,766 Likes: 22
Admin
|
|
Admin
Joined: Jul 2006
Posts: 2,766 Likes: 22 |
What happens when you dial 81 or 82 instead of 9?
Did you look at program 405-407 for line 3 and turn it off for ext 108?
You need to sit down with the Features manual and the Programming manual and read panasonics basics.
Carl
This model is end of life
|
|
|
|
|
Joined: Aug 2009
Posts: 1,118
Member
|
|
Member
Joined: Aug 2009
Posts: 1,118 |
Either that or swap your line one or two for line 3 position three and don't read the manual!
|
|
|
|
|
Joined: Apr 2002
Posts: 43
Member
|
|
Member
Joined: Apr 2002
Posts: 43 |
Gee people this is simple, put all three lines in Trunk group 1. Dial 9 will now grab the first line in the trun k group connected to co1, then if busy, to line 2 then if boith 1&2 busy, line 3.
The only dumb question is the one you don’t ask as that is the question that can make or break you. Brad
|
|
|
|
|
Joined: Jul 2006
Posts: 2,766 Likes: 22
Admin
|
|
Admin
Joined: Jul 2006
Posts: 2,766 Likes: 22 |
hey real, did you try it or are you just guessing? My 824 selects from top down, so I'll bet yours does too. The only small system I can remember that didn't was the TD-308 and the entire TD family. You selected the order the trunks seized.
Carl
This model is end of life
|
|
|
|
Forums84
Topics94,526
Posts640,016
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
170
guests, and
66
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
