|
Joined: Jul 2005
Posts: 146 Likes: 1
Member
|
OP
Member
Joined: Jul 2005
Posts: 146 Likes: 1 |
Hello, Have a customer that moved into a building with an existing system. Heres the info: I have a Panasonic KX-TDA50, using 7630 phones. Trying to get 8 port digital station card to work in slot 5. System never sees card. Software is MPR 1.1022,
Slot 1. KX-TDA5170 4-Port Hybrid Extension Card (HLC4) Slot 2. KX-TDA5180 4-Port Analog Trunk Card (LCOT4) Slot 3 KX-TDA5171 4-Port Digital Extension Card (DLC4) Slot 4 I tried with a 4 port digital, a 4 port CO and empty. Slot 5 KX-TDA5172 8-Port Digital Extension Card (DLC8)
I have initialized system with only a card in slots 1,2,5 with 8 phones. There is only one power supply could this be the problem? Any info would be greatly appreciated.
Doug
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
Member
Joined: May 2003
Posts: 2,924 |
Install the card with the console??
|
|
|
|
Joined: Jul 2005
Posts: 146 Likes: 1
Member
|
OP
Member
Joined: Jul 2005
Posts: 146 Likes: 1 |
No, it's been quite some time since I have done any Panasonic that I needed to use it. I haven't had the software since changing laptops, two laptops ago. Is the second power supply or expand mem required when installing a card in the Slot 5 position ?
|
|
|
|
Joined: Jul 2006
Posts: 2,715 Likes: 11
Admin
|
Admin
Joined: Jul 2006
Posts: 2,715 Likes: 11 |
No. The system had to be registered to expand beyond 4x4. I have a 12x20 box working just fine and it started to play as soon as I registered it.
I'd check the seating of the expansion card and reregister the system. Yes, I know you don't have access to the dealer website. I guess that's where we jump in and say CALL YOUR DEALER.
The second power supply is only needed when you add the 5th non-76/DT phone.
Carl
|
|
|
|
Joined: Aug 2009
Posts: 1,116
Member
|
Member
Joined: Aug 2009
Posts: 1,116 |
a 1.1022 did not need to be reg'ed
|
|
|
|
Joined: Jul 2005
Posts: 146 Likes: 1
Member
|
OP
Member
Joined: Jul 2005
Posts: 146 Likes: 1 |
Without needing to register am I able to add an 8 port digital card to slot 5 without using the console ?
|
|
|
|
Joined: Nov 2008
Posts: 48
Member
|
Member
Joined: Nov 2008
Posts: 48 |
I don't remember the software break point, but there were maximums of what would work in the original software releases . . i.e. Carl says that he has one working 12x20, but the original software / box would only work 8 by x.
I will have to agree w/ Carl: CALL YOUR DEALER.
Edward
|
|
|
|
Joined: Aug 2009
Posts: 1,116
Member
|
Member
Joined: Aug 2009
Posts: 1,116 |
I have 1.0 (I bought 2 of these and were one of the first ones out they shipped the manual to cert dealers later cause it didn't exist and software was in the box) out there still running with double power supplies that did not require A registration and has 9 KX-7436's a 7636 2 cell Stations 4 slts 4 doorphones .The other one I bought also has no rom id is in my house and it has a 12 7600's on it I don't see were you get that it only supported 8x8 that is just not the case....
|
|
|
|
Joined: Sep 2011
Posts: 1
Member
|
Member
Joined: Sep 2011
Posts: 1 |
Hello everyone, I have a problem and decided to register, hopefully I can help someone out along the line. I have a KX-TDA50 and a KX-TVA50, the PBX is registered and can see the DLC8 that I installed, I have a CS connected to it working perfectly. I have the VPS connected in AA Mode 2, I connected in Port 1 of the DLC8 and Port 1 of the VPS. When logging into the PBX Management Console Version 5 I do not have Extension ports listed under configuration. When logging into TVA Maintenance Console I cannot use auto configuration, the PBX has been configured for Floating Extension 500 but again I cannot configure the Extension because it does not exist. My goal is to connect the VPS in DPT with the PBX. I hope this is enough information for one of you pro's out there, I am new the this system so be nice to the noobs out there
Charles B
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
Member
Joined: May 2003
Posts: 2,924 |
Under CONFIGURATION/SLOT put mouse on the DLC8, a box comes up select port property/look under TYPE on the port you want to use.
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
|
|