|
|
|
|
Joined: Sep 2010
Posts: 11
Member
|
|
Member
Joined: Sep 2010
Posts: 11 |
Got a TDA 200 with MRP firmware V1.0054.
I have been trying to up grade to V5, but system will not load.
I gave also tried V3, 3.2 with same result
is this version upgradable!
Scott
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
|
Member
Joined: May 2003
Posts: 2,924 |
check your steps. Go over with TS.
|
|
|
|
|
Joined: Sep 2010
Posts: 11
Member
|
|
Member
Joined: Sep 2010
Posts: 11 |
TY brokeda, SD card loaded with V3 will not load, that is the first step, the system will not load.
I have downloaded fresh V3 SD card firmware from Panasonic Dealer portal. I have flushed the SD card, I have used a different SD card, system will not load any firmware other than V1.
I actually have 2 MPR's same version, same result.
Scott
|
|
|
|
|
Joined: Sep 2010
Posts: 11
Member
|
|
Member
Joined: Sep 2010
Posts: 11 |
PS, also did the steps over the phone with Technical Support
Scott
|
|
|
|
|
Joined: Sep 2010
Posts: 11
Member
|
|
Member
Joined: Sep 2010
Posts: 11 |
PSS/ I do not have any customer data to worry about so DSYS file does not matter
Scott
|
|
|
|
|
Joined: Aug 2009
Posts: 1,118
Member
|
|
Member
Joined: Aug 2009
Posts: 1,118 |
you were supposed to upgrade the v1.054 to a V2.0 before loading the 3.2 if you were look at tech note!
|
|
|
|
|
Joined: Sep 2010
Posts: 11
Member
|
|
Member
Joined: Sep 2010
Posts: 11 |
According to Panasonic "how to" sheet, Actually went to V1.1 first, it will not load.
I did not mention this because if you actually read the entire document like I did, it states that you should be able to load straight from V 1.1 to V3. It is actually V3 to V 3.2 that causes the problem, and I am having issues getting to V3 first.
If any one has some constructive advice other than "read your notes" would be greatly appreciated, if you have not had experiences with this level of firmware there is no need to give me your advice.
Scott
|
|
|
|
|
Joined: Sep 2010
Posts: 11
Member
|
|
Member
Joined: Sep 2010
Posts: 11 |
Scott
|
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
|
Member
Joined: May 2003
Posts: 2,924 |
|
|
|
|
Forums84
Topics94,522
Posts639,996
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Professor Shadow),
224
guests, and
41
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
