|
|
|
|
Joined: Jan 2005
Posts: 16
Member
|
|
Member
Joined: Jan 2005
Posts: 16 |
Hey Guys,
This one is about to drive me crazy, I have an Ipex w/ on board 4 pt Emagen VM.
The VM Ver. 10.3.11, I have set the volumes to 0 as directed by Tech support. I have also set the Co lines to Very Long.
What is happening is when you call in sometimes you get the greeting other times you don't hear anything then it hangs up.
Now I have noticed that this will happen occasionally when you try to get into your VM by using the VM hunt group DN, also I have gotten the same result when I try to access individual ports on the VM. But there is no rhyme or reason. Sometimes a specific port will not respond and other times it will.
I don't know what to do next.. HELP
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2002
Posts: 4,934 Likes: 1
Administrator
|
|
Administrator
Joined: Aug 2002
Posts: 4,934 Likes: 1 |
Software chip on the IPeX 0.7 and 2.07L. That cured my issues ------------------ ssimpson@oneringtelecom.com Need a Telrad Programmer Kit? Telrad Programmer Kits
|
|
|
|
|
Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
|
|
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281 |
How old is the IPEX. If you got it 01/05 to 03/05 you might want to replace it. Make sure you got the 0.7 chip on the ipex with the new hex file on the E-magen. But I think that was only for DTMF reg. problem for the 4-CO/CID add on module. ------------------ Need cable or other voice/data hardware? Here's your link. Telephone Supplies [This message has been edited by tony3866 (edited June 19, 2005).]
|
|
|
|
|
Joined: Aug 2002
Posts: 4,934 Likes: 1
Administrator
|
|
Administrator
Joined: Aug 2002
Posts: 4,934 Likes: 1 |
<font face="Verdana, Arial" size="2">Originally posted by tony3866:
How old is the IPEX. If you got it 01/05 to 03/05 you might want to replace it.
</font> Tony Did you have a IPeX you needed to replace. Of the 30 I have in service 5 came from the time frame you have listed and have no problems with at all. And you being a Telrad Dealer and certified on the product I am sure you just called into customer service or Tech support and they advance replaced the IPeX. But wait your not. ------------------ ssimpson@oneringtelecom.com Need a Telrad Programmer Kit? Telrad Programmer Kits [This message has been edited by SSPhone (edited June 20, 2005).]
|
|
|
|
|
Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
|
|
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281 |
They had a problem, Some went out bad some went out good. If you haven't had a problem don't worry about it but I would make sure you got the 0.7 chip on so you can uprade the software. I had one out of about ten that went bad. But it went bad with in a day or two. But I never expersens the pproblem on this postit. Don't get me wrong it is still a GREAT PRODUCT. ------------------ Need cable or other voice/data hardware? Here's your link. Telephone Supplies [This message has been edited by tony3866 (edited June 20, 2005).]
|
|
|
|
Forums84
Topics94,525
Posts640,013
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
248
guests, and
44
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/ad-icon/1013.gif){kind=icon}
