|
|
Joined: Oct 2007
Posts: 14
Member
|
Member
Joined: Oct 2007
Posts: 14 |
when dialing phone numbers, after beginning to dial, our phone times out if you don't input the numbers within 5 seconds. where in emanager can I increase this timer?
Thanks!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Feb 2005
Posts: 439
Member
|
Member
Joined: Feb 2005
Posts: 439 |
System Parameters -> System Timers -> Maximum Interdigit Dialing Time
Keep in mind that if you change this, it will extend the time between dialing, and the call going through.
|
|
|
|
Joined: Aug 2003
Posts: 1,281
Moderator-Telrad
|
Moderator-Telrad
Joined: Aug 2003
Posts: 1,281 |
Also check in system timers, First Digit Time Out, and Handsfree Time. I always set them to be unlimited.
|
|
|
|
Joined: Oct 2007
Posts: 14
Member
|
Member
Joined: Oct 2007
Posts: 14 |
In System Parameters -> System Timers -> Maximum Interdigit Dialing Time, it was set to 5 seconds. I changed it to 10 seconds and loaded it to the system. However, it's still dropping off in 5 seconds. do i need to restart the phone system to get this change to happen?
also, First Digit Time Out and Handsfree Time were both set to unlimited.
|
|
|
|
Joined: Aug 2002
Posts: 4,932 Likes: 1
Administrator
|
Administrator
Joined: Aug 2002
Posts: 4,932 Likes: 1 |
Are you using LCR? What software version is the system?
|
|
|
Forums84
Topics94,512
Posts639,934
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
2 members (nortelvoip, Taddeo),
135
guests, and
49
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|