sundance-communications.com/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems Identify port numbers on Strata DK40i

Added expansion card and 4 more phones to DK40i. Used programs 39 and 81 for line appearance and ringing. 3 phones work fine but one will not accept programming. I want to make sure I have port identified correctly. How do I do that? Any other suggestions will be appreciated.
Thanks,
Kirk

Did you do program 03 and reset the system when you added the card?

No, i did not.

Program 03 is where you add the card to the system and you have to reset for it to take effect.

You can identify that digital port by connecting a display phone to it. Then press intercom, # (pound key),402. The port will display on the phone.

Thank you for the information and suggestions. I will try this weekend and let you know of outcome.

After running program 03, I still cannot get this one phone to accept the programming. It still has intercom dialtone but no external dialtone for additional 6 lines. I plugged display phone in to port and it is displaying time, date, and station number 19. The port # is 009. I have used program 39 and 81 for line appearance and ringing. Is there a "soft initialize" that does not erase all of your data? Is it program 91-9? Any other suggestions?

Thanks,
Kirk

have you checked 39?

Yes. This is how I ran 39:

*#*#1*2*3 - Spkr39Hold - Spkr009*011 # LED Hold - Spkr##Hold - Spkr##Hold

I am configuring a 10 button phone with 6 lines with Spd dial button and DND button.
I used code 498 for DND and 497 for Spd Dial. Used 001-006 for phone lines.

Program 81:

*#*#1*2*3 - Spkr81Hold - Spkr (port# i.e. 009) # LED Hold - Spkr##Hold - Spkr##Hold

Any ideas or suggestions?

Thanks,
Kirk

Let's be constructive not negative.

Thank you
Site Admin

[This message has been edited by guru (edited August 14, 2003).]