#1 - make sure her class of service allows for trunk to trunk transfer.
This next step can only be done thru WinAdmin (not the phone)
#2 - Program the one touch button as 918773114860Px3050
Can be accomplished on R1.01 M21 and higher only
1. Pause can be assigned only from WinAdmin.
DKT programming cannot do it.
2. Usage to set pause is as follows. (Same as Speed Dial assignment)
Px - x=0-9 (seconds; the duration of the pause)
For example, P0 is 10 sec pause, P1 is 1 sec pause, P2 is 2 sec pause, etc.
Try that and let me know....
------------------
fingerlakestelecom.net [This message has been edited by Voyager (edited April 22, 2005).]