|
|
|
|
Joined: Aug 2005
Posts: 14
Member
|
|
Member
Joined: Aug 2005
Posts: 14 |
OK guys I think I am getting closer here......
The customer has always had access to 19 voice channels....... The last 3 channels (17,18,19) are not working....and these are the first channels the switch is grabbing to dial out L.D.
For some reason the customer only has access to 16 of thier 19 channels.....
Like we said....AT&T.....so I reprogrammed the switch to have access to only the 16...so they could utilize what they have....
Any Thoughts
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2005
Posts: 259
Member
|
|
Member
Joined: Aug 2005
Posts: 259 |
Are you sure it isn't a partial T-1, this means they only turn up 12 channels.
To test take b channels 13-24 out of the dial out pool.
|
|
|
|
|
Joined: Aug 2005
Posts: 14
Member
|
|
Member
Joined: Aug 2005
Posts: 14 |
No....they have always had 19 channels for voice.
The switch grabs 19, then 18, then 17 and so on to dial out.
These 3 channels are just dead air.....but 16 thru 1 work.....
|
|
|
|
|
Joined: Mar 2005
Posts: 406
Member
|
|
Member
Joined: Mar 2005
Posts: 406 |
I know this is an obvious question but they are the ones that I over look. Is your card programmed for a 16 or 24 port card in program 03
|
|
|
|
|
Joined: Mar 2001
Posts: 581
Member
|
|
Member
Joined: Mar 2001
Posts: 581 |
Com-Sys
how many slots are open to the right of the rdtu?
m
|
|
|
|
|
Joined: Aug 2005
Posts: 14
Member
|
|
Member
Joined: Aug 2005
Posts: 14 |
It is programmed for 24....
Nothing changed from the original setting when everything was working before this last Monday......
The one thing the customer states he did was powered off he system......he doesnt know if the T1 was working before this was done.....first he said it wasnt then he said it was....so who knows...
I am not looking at the cabinet right now but I believe there are 2 slots open to the right...
|
|
|
|
|
Joined: Mar 2001
Posts: 581
Member
|
|
Member
Joined: Mar 2001
Posts: 581 |
com-sys
my money is on the provider. everytime i have an issue like this it,s always the provider.
m
|
|
|
|
|
Joined: Mar 2005
Posts: 406
Member
|
|
Member
Joined: Mar 2005
Posts: 406 |
ditto martin we have had the same luck with providers you have to prove them wrong (we have never had a T-1 or PRI with a trouble that was programmed correctly that was a Toshiba fault) however I would double check the programs in the DK related to T-1 especially the ones that require power reset before burning to memory to make sure they were not changed when customer powered down, just to cover you ass. Good luck!
|
|
|
|
Forums84
Topics94,529
Posts640,030
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (BobRobert),
129
guests, and
63
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
