|
|
|
|
Joined: Jul 2005
Posts: 6
Member
|
|
Member
Joined: Jul 2005
Posts: 6 |
I got an old Toshiba DK 280 PBX, and it was working fine before resetting the RCTU. I have a toshiba DK 2020N2-SD digital phone connected to it. Whatever extension I dial, it says vacant even i try to setup time & date. I need to configure the pbx, so that it gets up running. I dont have any software or dongle to configure it. Can u please help me in this regard. It would be great if i am supported.
thanks in advance
uma
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
|
Member
Joined: Apr 2004
Posts: 4,991 |
Was this dk 280 a running system in a business or a system that you have on the bench ?
If this system has only 1 phone plugged in every other ext will show up vacant.
[This message has been edited by KENB (edited August 28, 2005).]
|
|
|
|
|
Joined: Jul 2005
Posts: 6
Member
|
|
Member
Joined: Jul 2005
Posts: 6 |
This DK280 was a running system in business. When we got it, it was working fine but the Extensions configured in the RSTU cards were not continuous, so we resetted the box by switching off the battery. After the reboot we found that all extensions deleted. We do not have a software or a Manual for this system and even we do not know the colour code details of the cable coming from the RSTU cards.
By checking in the Internet we found that we need DKAdmin software to configure this, but we do not know were to get it.
We need to configure this DK280 asap so plese help us in configuring this device.
Thanks in advance
uma
|
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
|
Member
Joined: Apr 2004
Posts: 4,991 |
Above there is alink for manuals .
Call john at manuals plus and over night a manual for installation and programming .
Follow the instructions in programming for a new installation. Use a dkt2020sd at port 005
Or look above in installers for a toshiba tech in your area.
If you have a pious in your system it can be accessed remotely and we can get in .
|
|
|
|
|
Joined: Feb 2005
Posts: 1,037
Member
|
|
Member
Joined: Feb 2005
Posts: 1,037 |
You first need to know that to use the DKAdmin software you'll need a dongle/software key. That'll run you about $250 from TSD or $500+ on the open market. The system is a fun system to program and can be programmed throught a 20 button display phone but you should get a skilled technician to do it. There are plenty of people here that can help you out. Good Luck!
|
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
|
Member
Joined: Apr 2004
Posts: 4,991 |
Bob
Hes in india.
Pack your dancing shoes.
[This message has been edited by KENB (edited August 30, 2005).]
|
|
|
|
Forums84
Topics94,528
Posts640,023
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Toner, justbill),
216
guests, and
39
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
