|
|
Joined: Aug 2005
Posts: 25
Member
|
|
Member
Joined: Aug 2005
Posts: 25 |
Right now I am managing 4 sites with Strata DK424's. Each site has a PIOUS2 PCB and I have modems that I can plug into these. Other that Pluging the modems into the SMDR port and moving SW3 to Modem. I'm not sure what to do. Do I need to use HyperTerminal? What kind of string do I need to use to dial? Any help in the right direction woulb be greatly appreciated. Thanks!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2004
Posts: 1,436
Member
|
|
Member
Joined: Sep 2004
Posts: 1,436 |
You would need the DKAdmin software along with the parallel port key.
Joe
---
No trees were harmed as a result of this posting; however, many electrons were severely inconvenienced.
|
|
|
|
|
Joined: Jun 2005
Posts: 139
Member
|
|
Member
Joined: Jun 2005
Posts: 139 |
good luck finding the key.
|
|
|
|
|
Joined: Jun 2005
Posts: 139
Member
|
|
Member
Joined: Jun 2005
Posts: 139 |
you could also use imdu's on thos pious2's.
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
Yes, you can use Hyperterminal but you'll need to know the commands.
|
|
|
|
|
Joined: Mar 2005
Posts: 406
Member
|
|
Member
Joined: Mar 2005
Posts: 406 |
You can still buy the keys from Toshiba, talked to our rep this past week
|
|
|
|
|
Joined: Jun 2005
Posts: 139
Member
|
|
Member
Joined: Jun 2005
Posts: 139 |
if you can get that key, then use imdu's on those pious cause the set up is much easier and you can transfer out of voicemail to it or have a line ring just to the imdu.
|
|
|
|
|
Joined: Aug 2005
Posts: 25
Member
|
|
Member
Joined: Aug 2005
Posts: 25 |
I do have the key and Admin software already.
|
|
|
|
|
Joined: Aug 2006
Posts: 9
Member
|
|
Member
Joined: Aug 2006
Posts: 9 |
I,m a Norstar Tech. I have a customer with a DK40i
system with a an expansion unit. I installed a stratagy IVP8 4 port 4 hours in slot 17. I had a
Toshiba tech. to program this card,but on incoming
calls the auto-attendant answer. When I try to access the voicemail system using station 200 a DKT2020SD telephone I cannot access the voicemail system.The Toshiba tech. said the access code is ***. He programmed the voicemail on ports 31 and 32. Is this problem a configuration problem are not?
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
If it's a 4-port IVP8, why did he program only ports 31 and 32 as vm ports? If it's not working right, why not call him back?
|
|
|
|
Forums84
Topics94,526
Posts640,016
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (nfcphoneman),
202
guests, and
49
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
