|
|
|
|
Joined: Feb 2007
Posts: 330
Member
|
OP
Member
Joined: Feb 2007
Posts: 330 |
I had a DK 280 RCTU/D processor drop it's programming. The backup battery checked out ok, so I defaulted the processor and after 2 solid days of programming I finally have it back to the way it was. What is involved in backing up the processor to a PC. Hardware-software etc.. I have a PIOU installed if that helps. Thanks as usual!! Drew
Hodgkin's Lymphoma Survivor! Took a step 20 years back in time. Managing the VHF radio network for the Florida Forest Service. Caloosahatchee District 17.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
|
Member
Joined: Apr 2004
Posts: 4,991 |
I know of 2 sets of toshiba software to do it ,I forget the exact nomenclature.
There are also several independent soft ware programs aailable .
Im sure someone will pop in with recommendations
Is there a modem on the PIOU either look its a card about 1 sq inch plugged on to piou or dial icm #19 and see if you get a modem tone. The
modem will give you remote access ,and you can plug a lap top into piou using program switches.
you will need to do some programming in 77 at least.
Im thinking lookin 03 to see how piou is assigned.
Again there will be someone with more knowledge
then I adding .
|
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
In former days you needed an expensive dongle for the software program to copy the programming but now you can get it for free from the Toshiba site if you are an authorized dealer.
Maybe someone can send it to you.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
DK Admin is what you will need along with a 6-conductor line cord and a PPTC-9 adapter. Set for 1200,7,E,1.
|
|
|
|
|
Joined: Feb 2007
Posts: 330
Member
|
|
OP
Member
Joined: Feb 2007
Posts: 330 |
I have a PPTC-9 adaptor and 6 cond. line-cord for SMDR onsite already.. DK Admin is software correct? Where can it be purchased? Thanks for the input.
Hodgkin's Lymphoma Survivor! Took a step 20 years back in time. Managing the VHF radio network for the Florida Forest Service. Caloosahatchee District 17.
|
|
|
|
Forums84
Topics94,284
Posts638,769
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (James D.),
138
guests, and
279
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
